| Mopar 10 Registry http://www.lonestarmopars.com/mopar10/forum/ |
|
| OEM Switches http://www.lonestarmopars.com/mopar10/forum/viewtopic.php?f=24&t=76 |
Page 1 of 2 |
| Author: | BrianM10 [ Tue Apr 03, 2012 5:51 pm ] |
| Post subject: | OEM Switches |
OK here is one for you guys..... The area where your hazard switch and ESP control switches are.... It looks like there are blank spots, anyone know if there is OEM switches that would fit in there? Even lighted ones would be nice. Lance you had this apart and it looks like one connection for both switches. I was just thinking for future projects it would nice to have the switches there or wire up a secret extra kill switch. There are also switches you can have that disables the break lights. What this does if you leave the car running parked somewhere you wont be able to put it in gear because it wont know your foot is on the break. That kinda james bond stuff. Can you say do a seat eject or arming weapons. LOL |
|
| Author: | n2blues [ Tue Apr 03, 2012 6:34 pm ] |
| Post subject: | Re: OEM Switches |
I think those were set up for the heated seat options. At least that's where they are located on the Ram and the Charger. |
|
| Author: | BrianM10 [ Tue Apr 03, 2012 8:17 pm ] |
| Post subject: | Re: OEM Switches |
Thanks..I have been looking online at some stuff and the unit may be 1 complete switch, however there are other buttons on them like disabling the airbag. So that being said I think if I were to get another module/switch set up (like the overhead console with homelink I did) I should be able to do something. I have to find the name or part numbers of it. I thought the heated seats were totally seperate switches and that would require a new bezel/frame. I am still searching. |
|
| Author: | n2blues [ Wed Apr 04, 2012 1:26 pm ] |
| Post subject: | Re: OEM Switches |
The heated seat switches on my Ram are on either side of the hazard light switch. I also have a heated steering wheel switch on that cluster. But I've never had it apart to see whats behind there. |
|
| Author: | BrianM10 [ Wed Apr 04, 2012 4:38 pm ] |
| Post subject: | Re: OEM Switches |
| Author: | n2blues [ Fri Apr 06, 2012 5:12 pm ] |
| Post subject: | Re: OEM Switches |
The Ram is a 9'r. I'm not sure about the 12 Chargers, but on the 11's I've seen so many dash configurations, I can't keep track. Kind of like the challengers, what ever was handy on the shelf that day got installed |
|
| Author: | BrianM10 [ Fri Apr 06, 2012 7:32 pm ] |
| Post subject: | Re: OEM Switches |
Thanks for the help. I am looking at the wiring specs from 2010 and 2012. If I use the 2012 switch module I will have to get the male and female ends of the connection to make my own harness adaptor. Which is not too hard it will be just finding the right ones. |
|
| Author: | TexasStroker [ Sat Apr 07, 2012 1:22 am ] |
| Post subject: | Re: OEM Switches |
I'll PM you an e-mail that might help... The heated seats are actually off to the sides with tall rectangular buttons. If we wanted to add the heated seats and utilize the factory switches we would have to source a different bezel. It bothers me not having a function...and I originally assumed they were for the heated seats until I thought back on friends R/T Classics, and then checked again to see the buttons to the side. I think you could modify it for some low profile rockers...I've wanted to get underdash leds and had considered wiring them to a rocker there (blue naturally) as opposed to making the switch cover panel for the thing by the cup holders...Idk what in the heck that is for, but I've found that my remote to the stereo fits perfectly and I sometimes stick the phone in there. |
|
| Author: | BrianM10 [ Mon Apr 09, 2012 11:23 am ] |
| Post subject: | Re: OEM Switches |
| Author: | TexasStroker [ Tue Apr 10, 2012 3:37 am ] |
| Post subject: | Re: OEM Switches |
Yep, keep us posted...Rod said he'd be glad to help. |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|