|
Author |
Message |
cdr
|
Posted: Sun Mar 11, 2012 6:23 pm |
|
Joined: Fri Feb 17, 2012 7:17 pm Posts: 34 Location: katy tx csa
|
|
|
workin on heads & intake
Attachments: |
heads 005 3.jpg [ 245.91 KiB | Viewed 56716 times ]
|
|
|
Top |
|
|
TexasStroker
|
Posted: Mon Mar 12, 2012 12:58 am |
|
|
Joined: Tue Feb 22, 2011 7:42 pm Posts: 948
|
|
|
What do you have them flowing?
Pretty sweet you've got a flow bench!
Founder, Amarillo Area Mopars Founder, Lone Star Mopars
|
|
Top |
|
|
cdr
|
Posted: Mon Mar 12, 2012 12:17 pm |
|
Joined: Fri Feb 17, 2012 7:17 pm Posts: 34 Location: katy tx csa
|
|
|
with clay around port @ .500 267 & then backwards out of the box super stealth heads ,been workin on one intake port using my flow bench,so far 320 cfm @.550 with 4.375 bore,im running 4.310 bore & it drops flow to308cfm,but im just starting,we will see when it goes to the track, my smaller bore is an issue ,was wanting to use my orig 383 & stroke it 496 ,but i think i might get a 400 block & go that route.also my tunnel ram kills the flow down to 270,did a little work on intake & got 284 but im gonna have to weld up intake in some places to get the correct port taper its smaller at the plenum opening than at the head i will keep ya'll up to date on my progress,but it will take awhile to get some more data,i want 340 cfm @.650 through the intake sooooo i need to find a 71-72 400 block
|
|
Top |
|
|
cdr
|
Posted: Tue Mar 13, 2012 6:08 pm |
|
Joined: Fri Feb 17, 2012 7:17 pm Posts: 34 Location: katy tx csa
|
|
|
|
Top |
|
|
cdr
|
Posted: Tue Mar 13, 2012 6:10 pm |
|
Joined: Fri Feb 17, 2012 7:17 pm Posts: 34 Location: katy tx csa
|
|
|
more
Attachments: |
HPIM1060.jpg [ 113.26 KiB | Viewed 56708 times ]
|
|
|
Top |
|
|
cdr
|
Posted: Tue Mar 13, 2012 6:52 pm |
|
Joined: Fri Feb 17, 2012 7:17 pm Posts: 34 Location: katy tx csa
|
|
|
|
Top |
|
|
Hd4406z
|
Posted: Tue Mar 13, 2012 8:11 pm |
|
Joined: Wed Jan 25, 2012 4:36 pm Posts: 61 Location: Kempner, Texas
|
|
|
Pretty good start, can't wait to see more
|
|
Top |
|
|
TexasStroker
|
Posted: Tue Mar 13, 2012 10:25 pm |
|
|
Joined: Tue Feb 22, 2011 7:42 pm Posts: 948
|
|
|
Founder, Amarillo Area Mopars Founder, Lone Star Mopars
|
|
Top |
|
|
cdr
|
Posted: Wed Mar 14, 2012 12:41 pm |
|
Joined: Fri Feb 17, 2012 7:17 pm Posts: 34 Location: katy tx csa
|
|
|
w
Attachments: |
018 2.jpg [ 225.78 KiB | Viewed 56702 times ]
|
|
|
Top |
|
|
cdr
|
Posted: Wed Mar 14, 2012 5:46 pm |
|
Joined: Fri Feb 17, 2012 7:17 pm Posts: 34 Location: katy tx csa
|
|
|
|
Top |
|
|
|
|