Lone Star Mopars http://www.lonestarmopars.com/forum/ |
|
charlie's 68 charger project http://www.lonestarmopars.com/forum/viewtopic.php?f=16&t=395 |
Page 1 of 2 |
Author: | cdr [ Sun Mar 11, 2012 6:23 pm ] | ||
Post subject: | charlie's 68 charger project | ||
workin on heads & intake
|
Author: | TexasStroker [ Mon Mar 12, 2012 12:58 am ] |
Post subject: | Re: charlie's 68 charger project |
What do you have them flowing? Pretty sweet you've got a flow bench! |
Author: | cdr [ Mon Mar 12, 2012 12:17 pm ] |
Post subject: | Re: charlie's 68 charger project |
with clay around port @ .500 267 & then backwards out of the box super stealth heads ,been workin on one intake port using my flow bench,so far 320 cfm @.550 with 4.375 bore,im running 4.310 bore & it drops flow to308cfm,but im just starting,we will see when it goes to the track, my smaller bore is an issue ,was wanting to use my orig 383 & stroke it 496 ,but i think i might get a 400 block & go that route.also my tunnel ram kills the flow down to 270,did a little work on intake & got 284 but im gonna have to weld up intake in some places to get the correct port taper its smaller at the plenum opening than at the head i will keep ya'll up to date on my progress,but it will take awhile to get some more data,i want 340 cfm @.650 through the intake sooooo i need to find a 71-72 400 block |
Author: | cdr [ Tue Mar 13, 2012 6:08 pm ] | ||||
Post subject: | Re: charlie's 68 charger project | ||||
1st pics are the day it came home
|
Author: | cdr [ Tue Mar 13, 2012 6:10 pm ] | ||
Post subject: | Re: charlie's 68 charger project | ||
more
|
Author: | cdr [ Tue Mar 13, 2012 6:52 pm ] | |||
Post subject: | Re: charlie's 68 charger project | |||
HPIM1061.jpg [ 139.95 KiB | Viewed 56404 times ] more
|
Author: | Hd4406z [ Tue Mar 13, 2012 8:11 pm ] |
Post subject: | Re: charlie's 68 charger project |
Pretty good start, can't wait to see more |
Author: | TexasStroker [ Tue Mar 13, 2012 10:25 pm ] |
Post subject: | Re: charlie's 68 charger project |
Author: | cdr [ Wed Mar 14, 2012 12:41 pm ] | ||
Post subject: | Re: charlie's 68 charger project | ||
w
|
Author: | cdr [ Wed Mar 14, 2012 5:46 pm ] | ||||
Post subject: | Re: charlie's 68 charger project | ||||
removed factory under coating & epoxied
|
Page 1 of 2 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |